Cubis Pro Mini Atomizer is a compact but powerful atomizer. It comes with top airflow and top filling system and the filling is done by simply removing the top cap, making vaping easier than before. And the anti-leaking cup design keeps you clean when refilling the tank,adopting innovative and leak resistant cup design, whose coil replacement and juice fill can be achieved by removing this top section from the cup. Airflow controls is also contained within the removable top tank assembly, meaning the possibility for leakage or coil flooding is greatly reduced. With the CUBIS Pro Mini atomizer, you’ll gain a perfect flavor and more precise vaping experience ever.E-Cigarette Wholesale – China leading ecig distributor Cacuq
The new LVC (Liquid Valve Control) Clapton-1.5ohm head applies the liquid valve control system.
You can simply rotate the ring on the base to adjust the liquid valve.Based on the top filling and top airflow technology, we made a slight modification to the tank. You can also simply uninstall the top cap from the airflow ring, then inject the e-juice into the two side holes (not the vent pipe) directly.
JOYETECH Cubis Pro MiniJOYETECH Cubis Pro Mini
With its special structure, CUBIS Pro Mini Atomizer can be easily detached and is able to wash separately.NotchCoilTM 0.25ohm DL . head, BF SS316 Series Heads, BF Clapton-1.5ohm head, BF Ni, BF Ti and BF RBA head.Many heads are available and i am sure that you may have interest in the newest head! You can simply rotate the airflow ring clockwise or counter-clockwise to adjust the airflow inlet.It is elegant in appearance and convenient in operation.Besides,you can Uninstall the atomizer tube, the atomizer head is located on the base, just unscrew it and replace with a new on。
JOYETECH Cubis Pro Mini
CUBIS Pro Mini atomizer adopts top filling and top airflow structure which enables you to refill the e-juice with great convenience. Simply uninstall the top cap from the airflow ring, then inject the e-juice into the two side holes (not the vent pipe) directly. The completely leak resistant cup-style tank reservoir allows the top section and coil to be removed and as one solid unit. Coil replacement and juice fill can be achieved by removing this top section from the cup.CUBIS Pro Mini atomizer perfectly fits the eVic Basic. E-juice filling can be easily achieved by simply removing the top cap and injecting into the side holes. The innovative CUBIS Pro Mini with leak resistant cup design allows you to enjoy the best vaping experience ever.
Besides that ,if you want to have a wonderful vaping experience, you can click here!
In a word,there are some features:
Exclusive TFTA-Tank Technology with Greater Convenience
Detachable and Washable Structure
Multiple Atomizer Heads Can Be Applied
Redesigned Airflow Control System
Support MTL and DL vaping
JOYETECH Cubis Pro Mini
How to assemble:
1. Screw the top cap onto the airflow ring and put the mouthpiece onto the top.
2. Drip a few drops into the atomizer head and install it onto the vent pipe.
3. Install the above part with the atomizer tube then the whole CUBIS Pro is assembled.
How to change atomizer head:
Unscrew the atomizer cap, the atomizer head is located on the cap. Just unscrew it and replace a new one.
1. Please don’t wash the atomizer head with water. Simply scrub it with cotton or clean dry cloth.
2. Please drip at least 5 drops of e-juice to the atomizer head and vape a few times in power-off condition (with airflow widely open) before its first use to avoid dry burn.
How to re-filling:
Separate the atomizer from the battery, and unscrew the mouthpiece base from the atomizer cap. Inject the liquid into the e-juice hole.
1. Please don’t fill in through the middle hole of the atomizer cap.
2. Please don’t overfill to avoid overflown.