New e-cigs products:ELEAF Istick Pico Mega Battery kit

This Pico Mega Battery is upgraded version of Istick Pico with new firmware that features a simpler interface. It can reach 80W max power and you can customize logo to your preference. What’s more, it supports both 18650 and 26650 cells.
ELEAF Istick Pico Mega Battery kit
Features
1.Compatible with both 26650 and 18650 cells
2.New firmware with a simpler interface
3.Custom logo in Smart mode
4.Maximum 80W output
Description
Eleaf Istick Pico Mega Battery
iStick Pico Mega, an upgraded version of iStick Pico, is compatible with both 26650 and 18650 cells. It is updated with the new firmware which features a simpler interface for VW mode, a Smart mode for easy operation and a custom logo for fun. The iStick Pico Mega also comes with many attractive colors for your choice.

New Firmware V1.01:
The new firmware features a simpler interface for VW mode, a Smart mode for easy operation and a custom logo for fun.

Unique Bottom Design:
The ventilation holes at the bottom are for better heat dissipation and the adjustment buttons are located at the bottom as well.

Interchangeable 18650 or 26650 Cell:
The iStick Pico Mega can be powered by a 26650 cell or a 18650 cell when inserted with the battery sleeve.

Parameter:
Size: 53.5mm*31.5mm*73.5mm
Thread type: 510 thread
Cell type: High-rate 18650 cell (Continuous discharge current should be above 25A)
Cell type High-rate 26650 cell (Continuous discharge current should be above 35A)
Output mode: Smart/VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Output wattage: 1-80W
Resistance range: 0.05-1.5ohm (TC modes)
Resistance range: 0.1-3.5ohm (Smart/VW/Bypass mode)
Temperature range: 100-315℃/200-600℉ (TC modes)

Be the first to comment

Leave a Reply

Your email address will not be published.


*